Journal of Siberian Federal University. Engineering & Technologies / Experimental Study of Temperature Distribution in a Cyclone-Vortex Furnace

Full text (.pdf)
Issue
Journal of Siberian Federal University. Engineering & Technologies. 2021 14 (1)
Authors
Kulik, Aleksandr V.; Dorogov, Evgenij Iu.; Soloveva, Tatyana A.; Shtym, Konstantin A.
Contact information
Kulik, Aleksandr V.: Far Eastern Federal University Vladivostok, Russian Federation; ; Dorogov, Evgenij Iu.: Far Eastern Federal University Vladivostok, Russian Federation; Soloveva, Tatyana A.: Far Eastern Federal University Vladivostok, Russian Federation; Shtym, Konstantin A.: Far Eastern Federal University Vladivostok, Russian Federation
Keywords
heat flow; temperature; yclone-vortex furnace; combustion chamber
Abstract

This article describes the experience and results of experimental study of the temperature distribution in the refractory lining of the gas and liquid fuel cyclone-vortex furnace (CVF). Temperatures were measured with type K thermocouples. Most of the thermocouples are located a depth of 25 mm from the surface combustion chamber. With increasing boiler load observed decrease in temperature and increase of plating unevenness of the temperature distribution in the combustion chamber. This is due to the redistribution of heat generated between the combustion chamber and the firebox as the load increases. The results of heat transfer studies in CVF will lead to a reduction in the thickness of the lining, modernization of the CVF structure. In the future, abandon the use of refractory lining in CVF

Pages
140-145
DOI
10.17516/1999-494X-0294
Paper at repository of SibFU
https://elib.sfu-kras.ru/handle/2311/138047

Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).