Siberian Federal University 
- Issue
- Journal of Siberian Federal University. Engineering & Technologies. 2023 16 (1)
- Authors
- Eremin, Evgenij N.; Kukushina, Kseniya G.; Tishchenko, Natalia M.
- Contact information
- Eremin, Evgenij N.: Omsk State Technical University Omsk, Russian Federation; Kukushina, Kseniya G.: Omsk State Technical University Omsk, Russian Federation; Central Design Bureau of Automatics Omsk, Russian Federation; ; Tishchenko, Natalia M.: Central Design Bureau of Automatics Omsk, Russian Federation
- Keywords
- dielectric constant; titanium dioxide; barium titanate; epoxy press material
- Abstract
The paper considers the effect of the introduction of titanium dioxide (TiO2) and barium titanate (BaTiO3) on the electrophysical and physicomechanical properties of a composite material based on an epoxy press material. The technology of preparation of composite materials with improved radio-technical characteristics is described. Such characteristics of the material as dielectric constant, shrinkage, hardness and water absorption have been established. The possibility of increasing the dielectric constant of the material is shown. It is established that the filling of 30 wt. TiO2 increases the dielectric constant by 1.4 times; the introduction of BaTiO3 in the same ratio – 1.7 times. The technology and modes of manufacturing parts from this material are given
- Pages
- 48–55
- EDN
- WIQOUC
- Paper at repository of SibFU
- https://elib.sfu-kras.ru/handle/2311/149891
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).